PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induceddoping method. In this method a copolymer of vinylidene chloride and methyl acrylate(VCMAC) was used as photo acid generator which can release proton when it is exposedto ultraviolet light (λ= 254 nm). The structure of PANI-VCMAC system before and afterirradiation was characterized by elemental analysis, IR, XPS, and SEM images. Resultsobtained indicate that the photo-induced doping characteristics, such as doping positionand type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (～10~(-5)S/cm) of PANI-VCMAC system after irradiation maybe due to low doping degree (～pH= 3) and the difference in morphology as compared withPANI-HCl film.     

动力学体系二维数据的秩分析及其应用

详细论证了动力学体系中存在的多种共线性情况,以及在此情况下二维数据阵的秩与独立反应数及组分数的关系.分析了通过增秩这一方式来判断体系组分数的条件.讨论了反应间存在物质交换对数据阵秩的影响.建立起一套通过秩分析判断未知动力学体系中存在的反应组分数、独立反应数以及可能反应机理的方法.将秩分析技术应用到聚苯胺与质子酸反应,初步分析了该体系存在的多种吸光性结构及结构变化.确定了[H＋]=0.01～0.1 mol•L－1范围内,聚苯胺与质子酸反应存在一个三结构两步互变过程.     

聚苯胺修饰超微盘电极上镉(Ⅱ)的表面络合吸附波

用直径7 μm的碳纤维组合成超微圆盘电极,以聚苯胺修饰电级.以阶梯扫描法、循环伏安法、双阶跃计时电量法和交流阻抗法等,研究了Cd2＋在该电极上的表面络合吸附特性和电极过程.在循环伏安图上出现两个还原峰,实验和理论都证明,由于电极表面的聚苯胺对Cd2＋的特性吸附,形成电活性的表面吸附态络合物.因此,这种表面络合物首先被还原,形成峰电位－0.90 V处的表面络合吸附波,还原峰电位比Cd2＋直接还原电位（－0.98 V）正移,循环反扫时,氧化波无峰形.根据实验数据推测了电极过程的反应机理,证实该还原波具有扩散和表面反应同时控制的表面络合吸附波的特性.理论计算与实验基本一致,并求得了表面吸附态配合物的形成常数、吸附量和表面络合反应的动力学参数.实验还证实,在峰电位－1.06 V 处的还原波,是Cd2＋的表面吸附还原态诱导而产生的催化氢波.     

利用天然生物分子合成导电聚苯胺的研究

本文综述了利用多种不同的天然生物分子如蛋白质(包括酶和氨基酸)、糖类、核酸、多巴胺和柠檬汁等为模板合成导电聚苯胺的研究进展。本文首先介绍了这些天然生物分子对产物聚苯胺的手性、导电率、形态以及其它方面性质的影响,归纳了利用天然生物分子合成导电聚苯胺的研究进展,然后分析了导电聚苯胺合成过程中面临的问题并对该领域的未来发展进行了展望,以期为制备性质优良和环境友好的新型导电聚苯胺材料提供有益的参考。     

Thermal degradation behavior of multi-walled carbon nanotubes/polyamide 6 composites

This paper focuses on the thermal degradation behavior of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites under air and nitrogen atmosphere using thermogravimetric analysis (TGA). The results show that the dispersion of amino-functionalized MWNTs (f-MWNTs) in PA6 is more homogeneous than purified MWNTs (p-MWNTs). The presence of MWNTs improves the thermal stability of PA6 under air obviously, but has little effect on the thermal degradation behavior of PA6 under nitrogen atmosphere. The activation energies for degradation under air, E_a, estimated by Kissinger method, are 153, 165 and 169 kJ/mol for neat PA6, p-MWNTs/PA6 and f-MWNTs/PA6 composites, respectively. The p-MWNTs/PA6 composites show two-step degradation not only under air but also under nitrogen atmosphere, however, neat PA6 and the f-MWNTs/PA6 composites exhibit two-step degradation only under air.     

含金属纳米粒子的层层自组装及单壁碳纳米管的催化生长

利用层间的静电吸附作用，重氮树脂和不同种类的含金属纳米粒子被依次吸附到硅片表面形成层层自组装膜。通过改变自组装膜的层数可以控制纳米粒子在表面吸附的量，同时利用重氮树脂的光敏特性可以实现纳米粒子在表面的图案化排布。以这些纳米粒子为催化剂，研究了单壁碳纳米管在硅片表面的化学气相沉积生长。     

碳纳米管基复合材料研究进展

碳纳米管基复合材料具有优良的性能,已在化学、化工、材料、生物、医学等领域受到广泛关注.本文主要综述了功能材料包覆碳纳米管的制备方法及其力学、磁学、光学、电化学等性质,以及当前研究的焦点和存在的问题.     

聚苯胺导电复合物二次掺杂的基材效应

对十二烷基苯磺酸掺杂的聚苯胺与氯磺化聚乙烯或苯乙烯－丁二烯－苯乙烯三嵌段共聚物形成的复合物的二次掺杂进行了研究。二次掺杂的复合膜经反掺杂后的ＵＶ－Ｖｉｓ吸收光谱在５８０￣８００ｎｍ处呈现宽的吸收，证实了二次掺杂后ＰＡｎ主链的展开，同时表明ＰＡｎ在ＣＳＰＥ中的展开较在ＳＢＳ中更充分，ＥＳＲ动态测试表明二次掺杂诱导主链的载流子间相互作用有２种方式；ＰＡｎ／ＣＳＰＥ中的单极化子转变为双极化子；ＰＡｎ／Ｓ     

Carbon Nanotubes Grown on Sepiolite as Catalyst Carrier

Multi-walled carbon nanotubes were synthesized by the catalytic decomposition of acetylene at 750℃ over sepiolite powder,which was treated with aqueous cobalt nitrate. It is expected that the composite with high specific area will have high capacity of hydrogen storage.     

Encapsulations of La@C82 and La2@C80 inside single-walled boron nitride nanotubes

Possibility of encapsulations of metallofullerenes inside single-walled boron nitride nanotubes (BNNTs) is studied by using first-principles calculations. We find that both La@C₈₂ and La₂@C₈₀ can be exothermically encapsulated inside the (17, 0) and (14, 7) BNNTs. The minimum diameters of exothermically encapsulating both La@C₈₂ and La₂@C₈₀ inside BNNTs are predicated to be about 13.4 Å.